How To Use NFC To Share Data Quickly Huawei P20 / P20 Pro

Underneath we’ll get into a portion of the arrangements On How To Use NFC To Share Data Quickly Huawei P20 / P20 Pro.

 

The Huawei P20 and Huawei P20 Pro are high-end Android smartphones made by Huawei. They were announced on March 27, 2018 as the successors to the Huawei P10 series. Its features included a Leica dual camera for P20 and a triple camera for P20 Pro, this series includes a mid-range smartphone called Huawei P20 Lite, that includes slightly lower specifications and differences to the P20.

The Huawei P20 mobile features a 5.8″ (14.73 cm) display with a screen resolution of 1080 x 2240 pixels and runs on Android v8.1 (Oreo) operating system. The device is powered by Octa core (2.36 GHz, Quad core, Cortex A73 + 1.8 GHz, Quad core, Cortex A53) processor paired with 4 GB of RAM. The battery has a capacity of 3400 mAh. The rear camera has a 12 MP camera CMOS sensor supporting a resolution of 4.000 x 3.000 Pixels and the front camera has a 24 MP CMOS sensor. Other sensors include Light sensor, Proximity sensor, Accelerometer, Compass, Gyroscope, and a fingerprint sensor. For graphical performance, this phone has got a Mali-G72 MP12 GPU. Standard storage is 128 GB. The Huawei P20 is 7.65 mm slim and weighs 165 grams.

 

How To Use NFC To Share Data Quickly Huawei P20 / P20 Pro:

 

Use NFC to Share Data Quickly:

NFC lets you share data across two devices quickly without the hassle of pairing. Simply place the NFC detection areas of both your devices in close proximity to each other, and then you can transfer files and other data quickly between the two NFC-enabled devices.

Use NFC to send data : Open Settings , then touch Device connection and enable NFC and Huawei Beam . Select the files to be sent and touch Share > Huawei Beam . Keep your Phone unlocked and the screen on. Place the NFC detection areas of both devices close together. Once a connection is established, the transmitting device will play an audio prompt and the sharing screen will minimize. Touch the transmitting device’s screen to begin sending files.

Receive files over NFC : Open Settings , then touch Device connection and enable NFC and Huawei Beam . Keep your Phone unlocked and the screen on. Place the NFC detection areas of both devices close together. Once a connection is established, the transmitting device will play an audio prompt. After the prompt, please wait for the file transfer to complete. Received files are saved by default to the Beam folder of your Files .

If there is an option to enable Read and write/P2P on the NFC screen, ensure that it is enabled. Features may vary depending on your carrier.

 

Experiencing difficulties with your Android Device, check out our “How To” page on how to resolve some of these issues.

Other Android Technical Reviews:-  Android

LEAVE A REPLY

Please enter your comment!
Please enter your name here